budlaha.blogg.se

Once you connected to tftp server, you will get a tftp prompt as, tftp> $ cd YOUR_WORKSPACE_DIRECTORYĬonnect to TFTP server using below command,įor example, $ tftp 192.168.0.100 will connect your tftp client to your tftp server. Note: since below command download or upload from current working directory, make sure you “cd” to that respectivie directory where you want to download the files from tftp server or where your files which you want to upload to tftp server are present. Once you have the TFTP server setup, for this example, we will assume the IP address of Ubuntu machine where you setup TFTP server is 192.168.0.100 $ sudo cp -r FOLDER_WITH_FILES/* /var/lib/tftpboot Using TFTP Client One we have setup, tftpserver now we will need to copy images which we want to flash on the target. On other Ubuntu versions, you may see tftp server started with directory /var/lib/tftpboot Setting up TFTP server ( This commands are also mentioned in our another post “How to setup tftp server on Ubuntu ?” sudo apt-get install tftpd-hpa sudo apt-get install tftp sudo service tftpd-hpa startĪbove steps will install tftp server, creates directory /srv/tftp on Ubuntu 20.04 and start the tftp server, which you can check using below command, $ ps -ax | grep tftpģ2850 ? Ss 0:00 /usr/sbin/in.tftpd -listen -user tftp -address :69 -secure /srv/tftp

We are using Ubuntu as tftp client to demonestrate tftp client usecase, normally Ubuntu is used as tftp server and your embedded target is used as tftp client, so same below commands will also work on embedded target tftp client. Following is the procedure which will guide you for setting up the Linux PC as a tftp client.